ISO Tube - Nominal Size (DN)

Welded Tube, Pickled, 6 mtr R/L's - Un-annealed. EN ISO 1127, EN10217-7

Test certificates according to EN 10204 3.1.

DN  O/D wall thick     (BAR) working pressure T304/L weight AISI 304L AISI 316L
mm mm     (**see below) kgs    
15 21.3 2.0 offered to ASTM A312.  2.11mm W/T 211.40 1.00 * *
20 26.9 2.0 163.86 1.28 * *
25 33.7 2.0     128.71 1.59 * *
32 42.4 2.0     100.99 2.02 * *
40 48.3 2.0     88.12 2.32 * *
50 60.3 2.0     69.98 2.92 * *
65 76.1 2.0     55.06 3.71 * *
80 88.9 2.0     46.95 4.35 * *
100 114.3 2.0     36.33 5.63 * *
125 139.7 2.0     29.63 6.8 * *
150 168.3 2.0     24.53 8.33 * *
200 219.1 2.0     18.79 10.87 * *
200 219.1 3.0     28.32 16.23 * *
250 273 2.0     15.06 13.57 * *
250 273 3.0     22.67 20.28 * *
300 323.9 2.0     12.67 16.12 * *
300 323.9 3.0     19.07 24.1 * *
  Tolerance on Dimension EN ISO 1127
Outside Diameter  mm Tolerance on O.D  Tolerance on thickness 
Tolerance class Allowed deviation Tolerance class Allowed deviation
D< 168.3mm D3 plus/minus 0.75% T3 plus/minus 10%                                  min plus /minus 0.20mm 
min plus/minus 0.30mm
D>168.3mm D2 plus/minus 1%
min plus/minus 0.50mm
* D4 tolerance on request              
** ISO Tube according to EN10217-7 does NOT specify any pressure values, also because so many factors can effect working pressure. 
** We cannot guarantee the pressure values listed as they are for general information and to be used as a guide only.
** There is formula to get the working pressure of T304/L welded tubes at room temperature (this formula is merely indicative and do not involve so many variables):
** Formula used:- 10.2 x 200 x thickness            
--------------------------------- = bars          
Out.Diam – thickness            
** IMPORTANT:The working pressure values indicated are as a GUIDE only, and Neumo UK Ltd accept no liability to any loss or damage caused by using this information.